欢迎光临深圳市锐创达电子有限公司官网
24小时服务热线:075582370515
产品中心 > BP1109S-0541
IMG_0447_副本 - 複製.jpg
  • IMG_0447_副本 - 複製.jpg
  • IMG_0447_副本.jpg
  • IMG_0445_副本 - 複製.jpg
  • IMG_0448_副本 - 複製.jpg

BP1109S-0541

1. SPECIFICATION

Piezoelectric Ceramic Buzzer SMD

1

Dimension

11.0X9.0X1.8

2

Net Weight

Approx 0.5g

3

Resonant Frequency

4100±500 Hz

4

Operating Voltage

120Vp-p

5

Rated Current

Max.7mA ,at 4.1KHz 50% duty Square Wave 5Vp-p

6

Sound Output

Min. 75dB,at 4.1KHz 50% duty Square Wave 5Vp-p

7

Capacitance

12000pF±30%,at 120Hz

8

Operating Temperature

-20℃+70℃

9

Store Temperature

-30℃+80℃

10

RoHS

Yes

Dimensions                       Unit: mm

1.png


*Unit: mm; Tolerance: ±0.3mm Except Specified

*Housing Material: Black LCP

2. Reliability Test

After any following tests the part shall meet specifications without any degradation in

appearance and performance except SPL. SPL shall not deviate more than -10 dB

from the initial value

2.1 Ordinary Temperature Life Test

The part shall be subjected to 96 hours at 25±10. Input rated voltage

Resonant frequency, 1/2 duty Square wave.

2.2 High Temperature Test

The part shall be capable of with standing a storage temperature of +85 for 96 hours.

2.3 Low Temperature Test 

The part shall be capable of with standing a storage temperature of -40 for 96 hours.

2.4 Humidity Test

Temperature:+40℃±3℃   Relative Humidity:90%95% Duration: 48 hours

and expose to room temperature for 6 hours

2.5 Temperature Shock Test

Temperature:70/1hour25/3hours-30/1hour25/3hours (1cycle)

Total cycle: 10 cycles

2.6 Drop Test

Standard Packaging From 1.2m(Drop on hard wood or board of 5cm thick,

three sides, six plain.)

2.7 Vibration Test

Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

Note:

As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it.

3. Electrical And Acoustical Measuring Condition

3.1 Recommended Setting

2.png

4. Frequency Response

3.png 

5Vp-p 50% duty Square wave,10cm

5. Surface mounting condition

5.1 Reflow soldering

Recommendable reflow soldering condition is as follows.

4.png 

Note: (1) In automated mounting of the SMD sound transducers on PCB, any bending, expanding

and pulling forces or shocks against the SMD sound transducers shall be kept minimum

to prevent them from electrical failures and mechanical damages of the devices.

(2) In the reflow soldering, too high soldering temperatures and too large temperature

      Gradient such as rapid heating or cooling may cause electrical failures and mechanical

damages of the devices.

6. Packing

6.1Dimension Of Carrier Tape

5.png 

6.png

6.2Dimension Of Plastic Reel

11.png

7. Inside Structure

22.png




上一个: BP1032W15-0534
下一个: BP1230S-0540